Men L (chest 100 cm)
Bow tie pattern, men's size L (100 cm chest)
Bow tie in four shapes, sized to your neck.
2pattern pieces
12pieces to cut
≈ 0.25 ydof main fabric (60" wide)
You will also need: interfacing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Woven fabric (cotton, linen, poplin…)
- Fusible interfacing
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Interface one layer, sew both layers together leaving an opening in the middle.
- Turn the piece through the opening, push out the corners and press.
- Close by hand and add the adjustable neck hardware.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Bow | 4× | Main fabric |
| Bow | 4× | Interfacing |
| Collar band | 2× | Main fabric |
| Collar band | 2× | Interfacing |
Measurements used in this size
| Measurement | Value | How to measure |
|---|---|---|
| Neck circumference | 38 cm | Around the base of the neck, where a shirt collar sits. |
Between two sizes?
Standard sizes are a starting point. Enter your own measurements in the editor and the pattern is redrafted for your body in seconds, for free.
Open in the editor