Accessories & bags · Intermediate
Bow tie sewing pattern
Bow tie in four shapes, sized to your neck.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
You will also need: interfacing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Woven fabric (cotton, linen, poplin…)
- Fusible interfacing
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Interface one layer, sew both layers together leaving an opening in the middle.
- Turn the piece through the opening, push out the corners and press.
- Close by hand and add the adjustable neck hardware.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Bow | 4× | Main fabric |
| Bow | 4× | Interfacing |
| Collar band | 2× | Main fabric |
| Collar band | 2× | Interfacing |
Measurements needed
| Measurement | How to measure |
|---|---|
| Neck circumference | Around the base of the neck, where a shirt collar sits. |
FAQ
Is the bow tie pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 1 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
