T-shirts & tops · Intermediate

Princess seam top sewing pattern

Fitted strappy top with princess seams shaped to the bust.

Choose your size

Each size has its own page with the full pattern, the cutting list and the measurements used.

Pattern preview

Princess seam top sewing pattern
Full pattern with 1 cm seam allowance · 49 × 80 cm
4pattern pieces
8pieces to cut
≈ 0.75 ydof main fabric (60" wide)

Sewing instructions

General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.

Supplies

  • Woven fabric (cotton, linen, poplin…)
  • Lining fabric
  • Zipper
  • Matching thread and the right needle
  1. Prewash and press your fabric before cutting so it will not shrink after sewing.
  2. Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
  3. Sew the princess seams matching the notches; clip the curves before pressing.
  4. Make the straps (turned fabric tubes), adjust the length during a try-on and sew them in place.
  5. Sew the side seams right sides together and press open or finish the allowances.
  6. Assemble the lining like the shell, attach it to the facings and bag it at the hem, leaving an opening to turn.
  7. Insert the invisible zipper in the back or side seam and close the rest of the seam.
  8. Hem: double-fold to the inside, press and topstitch or blind stitch.

Cutting list

PieceCutMaterial
Front inside2×Main fabric
Front outside2×Main fabric
Back inside2×Main fabric
Back outside2×Main fabric

Measurements needed

MeasurementHow to measure
High bust circumferenceAround the torso, under the armpits and above the bust.
Chest/bust circumferenceAround the torso at the fullest part of the chest, tape level.
Underbust circumferenceAround the torso, just below the bust.
Waist circumferenceAround your natural waist, the narrowest part of the torso.
Waist backBack part of the waist circumference, side to side.
Bust spanHorizontal distance between the two bust points.
Neck circumferenceAround the base of the neck, where a shirt collar sits.
Shoulder to bustFrom the high point of the shoulder (next to the neck) to the bust point.
Front lengthFrom the high shoulder point, down the front, to the waist.
Back lengthFrom the high shoulder point, down the back, to the waist.
Shoulder widthFrom one shoulder point to the other, across the back.
Shoulder slopeShoulder angle in degrees (usually between 10 and 15).

FAQ

Is the princess seam top pattern really free?

Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.

Which measurements do I need?

This pattern uses 12 body measurements. If you don't know them, pick a standard size or follow our measuring guide.

Does it include seam allowance?

Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.

How do I print it at full scale?

In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.

More t-shirts & tops patterns