Head 62 cm
Flat cap pattern, 62 cm head
Rounded flat cap with a small stiff brim.
5pattern pieces
9pieces to cut
≈ 0.75 ydof main fabric (60" wide)
You will also need: lining, rigid interfacing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Tweed or wool
- Lining fabric
- Stiff interfacing for the brim
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Join the crown and side panels, press seams open.
- Sew the brim with its stiff interfacing, turn it and attach it to the front edge.
- Assemble the lining like the shell, attach it to the facings and bag it at the hem, leaving an opening to turn.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Top | 2× | Main fabric |
| Top | 2× | Lining |
| Side | 1× on the fold | Main fabric |
| Side | 1× on the fold | Lining |
| Brim bottom | 1× | Main fabric |
| Brim top | 1× | Main fabric |
| Brim interfacing | 1× | Rigid interfacing |
Measurements used in this size
| Measurement | Value | How to measure |
|---|---|---|
| Head circumference | 62 cm | Around the head, above the eyebrows and ears. |
Between two sizes?
Standard sizes are a starting point. Enter your own measurements in the editor and the pattern is redrafted for your body in seconds, for free.
Open in the editor