Pants & shorts · Intermediate
A-line shorts sewing pattern
Wide-leg A-line shorts.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
You will also need: interfacing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Woven fabric (cotton, linen, poplin…)
- Zipper
- Fusible interfacing
- Matching thread and the right needle
- Prewash and press your fabric before cutting so it will not shrink after sewing.
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Make the front pockets: facing and pocket bag, topstitch the opening and baste at the side.
- Install the zip fly: fly facing, fly shield and J-stitch.
- Sew the outseams, then the inseams of each leg.
- Put one leg inside the other, right sides together, and sew the crotch seam in one go, matching the inseams.
- Interface the waistband, sew it to the waist, fold it to the inside and finish by hand or by stitching in the ditch.
- Make the belt loops, attach them at the waist and add the button and buttonhole on the waistband.
- Hem: double-fold to the inside, press and topstitch or blind stitch.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Front | 2× | Main fabric |
| Back | 2× | Main fabric |
| 2× | Main fabric | |
| Pocket facing | 2× | Main fabric |
| Pocket back | 2× | Main fabric |
| Yoke | 2× | Main fabric |
| Fly facing | 1× | Main fabric |
| Fly extension | 1× on the fold | Main fabric |
| Waist back | 2× | Main fabric |
| Waist back | 1× | Interfacing |
| Belt loops | 1× | Main fabric |
| Waistband left | 1× | Interfacing |
| Waistband right | 1× | Interfacing |
Measurements needed
| Measurement | How to measure |
|---|---|
| Cross seam | From the front waist, between the legs, to the back waist. |
| Front cross seam | From the front waist to the crotch point. |
| Knee circumference | Around the knee, with the leg straight. |
| Seat circumference | Around the fullest part of the buttocks. |
| Seat back | Back part of the seat circumference, side to side. |
| Waist circumference | Around your natural waist, the narrowest part of the torso. |
| Waist back | Back part of the waist circumference, side to side. |
| Waist to floor | Along the side, from the waist to the floor, barefoot. |
| Waist to knee | Along the side, from the waist to the knee. |
| Waist to hips | Along the side, from the waist to the hip line. |
| Waist to seat | Along the side, from the waist to the fullest part of the buttocks. |
| Waist to thigh | Along the side, from the waist to the thigh line. |
| Inseam | From the crotch to the floor along the inside of the leg. |
| Hip circumference | Around the hips, at the level of the hip bones. |
| Crotch depth | Seated on a flat chair: from the waist to the seat, along the side. |
FAQ
Is the a-line shorts pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 15 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
