Hats & caps · Intermediate
Deerstalker hat sewing pattern
Hat with front and back brims and ear flaps.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
You will also need: lining.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Tweed or wool
- Lining fabric
- Ribbon for the ear flaps
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Join the six crown sections into two halves, then join the halves.
- Sew the brims and ear flaps with their lining, turn and attach them.
- Assemble the lining like the shell, attach it to the facings and bag it at the hem, leaving an opening to turn.
- Make the ties (turned tubes or folded strips), sew them in place and test the fit.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Crown | 6× on the fold | Main fabric |
| Crown | 6× on the fold | Lining |
| Visor | 4× | Main fabric |
| Visor | 4× | Lining |
| Ear flap | 4× | Main fabric |
Measurements needed
| Measurement | How to measure |
|---|---|
| Head circumference | Around the head, above the eyebrows and ears. |
FAQ
Is the deerstalker hat pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 1 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
