Baby · Intermediate
Baby bib sewing pattern
Baby bib with a snap closure.
Pattern preview
1pattern pieces
1pieces to cut
≈ 0.5 ydof main fabric (60" wide)
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Cotton and terry cloth
- Snaps
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Place outer and terry right sides together and sew around, leaving an opening.
- Turn the piece through the opening, push out the corners and press.
- Topstitch all around 3 mm from the edge to close the opening and give a clean finish.
- Add a snap or hook-and-loop fastener at the closure.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Bib | 1× | Main fabric |
FAQ
Is the baby bib pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
